> Jim Reid wrote:
> >
> > Aloha,
> >
> > Ok, have put this off a long time. But today ordered
> > from George at INRAD the pair of "new" 2.8kHz
> > filters: 8 poles at both the 9 MHz ( IRD #754) and 6Mhz
> > (IRD #755) boards. Will replace the TT "standard"
> > 2.4kHz filters at both sites.
>
> Hi, Jim. I've been following your e-mail, since your
> purchase of the Omni VI Plus. I'm getting ready to take the
> same plunge soon; probably at the end of the summer.
>
> Based on what you've written, as well as several others in
> agreement, I will probably order the Omni stock, and order
> the two 400 Hz filters from INRAD. After using that
> configuration for a while, I'll decide whether to order
> the 250 Hz filter(s).
>
> I'm sure this must have been asked before, but does anyone
> know why INRAD doesn't offer the 250 Hz filter for the 9 MHz IF?
> Wish I had asked Scott at Ten-Tec the other day, when we had an
> enjoyable landline conversation.
>
> > If these work out as I anticipate, will have several TT
> > filters to sell, including, at 250 Hz BW, #'s 221 and
> > 282; and the two "standard" TT 2.4kHz filters, one
> > at 9 and the other at 6 MHz, and the TT 500 Hz
> > BW #'s 217 and 285
>
> I'll watch for future e-mail from you, WRT to selling the 250 Hz
> filters. If/when you make that decision, I might want to get the
> one for the 9 MHz IF.
>
> 73 de Jim - AD6CW
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|