TenTec
[Top] [All Lists]

[TenTec] Strange Omni VI+ Problem

To: <tentec@contesting.com>
Subject: [TenTec] Strange Omni VI+ Problem
From: n2eft@arrl.net (Robert - N2EFT)
Date: Fri, 16 Jul 1999 11:14:55 -0600
For the last few week I've been having an intermittent problem with my
Omni VI+ and was wondering if any have had a similar experience. Every
so often, when in TUNE or keying manually,  the output of the rig will
jump to about 140 watts (collector current is 20 amps) - regardless of
the front panel power setting. When this is happening the internal keyer
doesn't function. If I place the rig in sideband and press the PTT (or
don't connect a mic and shorting the PTT) the output power jumps at
random - just as if someone were speaking into the mic.

I've disconnected the rig from everything but a power supply (tried
three different Astron 25amp linear supplies) and a dummy load... same
results. I know if I send it back to Ten-Tec the problem will not appear
as long as a tech is watching it (isn't that the definition of an
intermittent problem!) - but I may end up doing that anyway.

Any clues would be most welcome!

Thanks & 73 - Robert
n2eft@arrl.net

P.S. I may have sent this twice - sorry if I did.

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Strange Omni VI+ Problem, Robert - N2EFT <=