TenTec
[Top] [All Lists]

[TenTec] [Ten Tec] Omni VI plus - noise

To: <tentec@contesting.com>
Subject: [TenTec] [Ten Tec] Omni VI plus - noise
From: SteveBaron@starlinx.com (Steve Baron)
Date: Mon, 19 Jul 1999 16:54:56 +0100
Congratulations on the new rig.

Seems to me that the TR-7 was known for a gain problem and they did add some
gain in the 7A - guess that was mostly for the higher frequencies and
perhaps totaly unrelated to what you are seeing.

Tell us more about conditions when you hear this noise: mode, filters, dummy
load connected, DSP flter, etc.  Lots of things on a VI that can change
audio.


-----Original Message-----
From: Piotr Tomczak <pito@nera.no>
To: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Monday, July 19, 1999 8:08 AM
Subject: [TenTec] [Ten Tec] Omni VI plus - noise



Hello to all of you...

I have just bought a Omni VI plus and since I am new to the Ten Tec I would
like to
hear your comments to my 'problems'.

I always used the TR7 Drake. (it is not a problem - great rig)

When I started to play with Omni VI I discovered that it is much more noisy
rig then the TR7. I did not understand why until I started to play with the
RF coontrol
knob. I always had the RF to max on TR7 and never had a slighty problem with
signal distortions (15 years of use). I understand that some of you
frequently use that
knob.
I turned the Omni RF knob a little back (one 'hour')
from '5 to '4 clock and discovered that the reception is now very good,
as good or better then on the DRAKE TR7.

So I disconnected the antenna and listened to the audio.
First -- the RF gain to MAX '5 clock - I could hear some high freq noise or
a white noise.
Second -- I turned the RF gain back to the point that the noise disseapred.
The knob pointed just above the '4 clock seting.

Now I have a question to you. Can I temper the RF gain in the way that the
noise is not bothering ?. I could change the inpit stage a little bit and
the
rig would sound good again. Does any body have experianced that ?
Does any body fix that problem ?

I Would appreciate some help.
Are there more smart tips for the newcommer to the TenTec ???

Best regards Piotr
LA9HFA
--------------
   \\\@///
     ·    ·
       o
-------------
Piotr Tomczak           Ham call: la9hfa
Nera ASA                  Tel: +47 6724 3135    Fax: +47 6724 4445
1361 Billingstad         E-mail job:        pito@satcom.nera.no
Norway                      E-mail home:    la9hfa@qsl.net


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm




--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>