I have a variety of TenTec goodies for sale.
TenTec 525 Argosy transceiver. This is the rig that
TenTec made that has a switch for either 5 or 50 watts
output. Of course many people have added an adjustment
to make that 5 watts go even lower. It has full QSK on
CW, and a great sounding receiver. This one has the
226 xtal calibrator in it, and also has had the original 4 pole
filter replaced with the better model 220 eight pole filter.
Manual included for $275.
TenTec 224 audio CW filter. Adds several stages of
additional filtering to the Argosy. Paper work included
for $40 by itself, or $35 if purchased with the Argosy.
TenTec 223 noise blanker for the Argosy. Paper
work on this one also for $45 by itself, or $ 40
with the Argosy.
TenTec 225 Power Supply. Good for 9 or 10 amps
at 13 V DC. Powers the Argosy, or can be used with
other radios. Includes over voltage and over current
protection. Manual included for $ 100.
TenTec 218 filter, 1800 Hz, for 9 MHz IF. Can be used
in the Argosy, Omnis, and any of the TenTec rigs using
a 9 MHz IF. In the box, for $ 70.
TenTec 252 power supply, 20 amp, 13 V DC supply.
With ammeter and speaker. Matches the Triton series
in color and styling. $ 100
TenTec 280 heavy duty 20 amp, 13 V DC power supply
ammeter, manual, presently has connector for
Kenwood/Icom, but can easily be changed to
whatever connector is needed. With manual for $ 135.
TenTec 255 heavy duty deluxe 20 amp, 13 V DC supply.
Speaker and ammeter included. Matches the Omni
Series A, B, and C. With manual for $ 150.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-Mail to W8EK@fdt.net or W8EK@juno.com
Voice Phone (352) 732-8400
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|