TenTec
[Top] [All Lists]

[TenTec] TenTec RX-320 S-meter question.

To: <tentec@contesting.com>
Subject: [TenTec] TenTec RX-320 S-meter question.
From: weingaertner@nac.net (Robert Weingaertner)
Date: Tue, 16 Nov 1999 21:26:16 -0500
The calibration standard for S-meters that is usually quoted is 
50 microvolts = S9. Likewise, 1 S unit represents a 6 dB change in
signal strength. However, this is far from universal. S meter 
readings can vary widely from receiver to receiver and from band to
band on the same receiver. The only receivers that can be considered 
truly calibrated are the multi-k-$ laboratory grade ones. Thus you
should consider most S meter readings as relative.

Great quote from Garth Brooks! Amen! 73, Bob WB2VUF




Randy and Cara Randall wrote:
> 
> Hello.  I am wondering if the S-meter reading is calibrated
> in
> standard S-units or is it an arbitrary scale?  My set has
> most SW transmissions at S-60 to S-80.  On my
> Drake SW2 with the same antenna S-20 to S-30
> maybe S-40 on the same station.  Ideas?  The manual
> does not mention the S-meter at all!
> 
> Thanks,
> Randy.
> 
> --
> 
> "...just because He doesn't answer, doesn't mean He don't
> care...some of God's greatest gifts are unanswered
> prayers."  -Garth Brooks
> 
> Check out Fiberfriends! No flames, just fun!
> http//members.spree.com/family/happygal
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>