i just acquired a ten tec centurion. before i connect up or try cw on it, i
want to ask the correct way to hook up the 570 which has its own keyer. the
centurion manual shows how to hook up a cw key to the qsk circuit, but not a
paddle. the internal keyer in the ts570
seems to work fine using the vox/ptt relay directly, the same as keying a mike
or using vox. the centurion manual also explains how to hook up the output of
an external keyer to the qsk circuit but makes no mention of using a rig with
an internal keyer. since the
ptt/vox plug is used in conjunction with external keyers, can i conclude that
the qsk board can be bypassed if the relay timing
in the rig exceeds the centurion timing?
tnx fer help
de ben k8dit/7
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|