Does the rig trip off or the power supply? I've had a problem like this
with the power supply tripping off and it turned to be a broken shield in
one of the coax jumpers. Mine was on 20 meters at about 200 watts from
the amp the RF would trip it off. Check them all by screwing back the
shell of the PL-259 and twist the coax, look for any movement of the
shield in there. Some times just unpluging one and reconnecting it will
expose a weak joint in these.
Good luck, 73 Jeff aa8ve
On Sat, 27 Nov 1999 11:47:55 -0600 "Bill Hawkins" <w5ec@digitalexp.com>
writes:
> I sent my IV+ back to Ten Tec for service.
> It works great now except there is a new problem:
> when I use the amp (Clipperton-L) on 80 meters, the IV+ kicks off,
> even on very low drive (10 watts). SWR is not excessive as I use a
> tuner into the amp.
> It never did this before and it works on all other bands.
> Any ideas?
> Bill W5EC
___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|