TenTec
[Top] [All Lists]

[TenTec] Equalizing charge

To: <tentec@contesting.com>
Subject: [TenTec] Equalizing charge
From: richg@toolcity.net (Rich Gaarden)
Date: Tue, 28 Dec 1999 07:22:08 -0500
The term +ACI-equalize+ACI- simply means a controlled overcharge. This 
procedure is
used to adjust the difference between cells that develop due to temperature
variation within the battery, manufacturing, and cycling of the battery.
The equalize charge will also help scrub off sulfate particles that tend to
build up on the battery's positive plate.  If  a cell has a .020 difference
in specific gravity or at least once a month you should equalize.  Generally
you continue the charge for an additional 3 hrs after the battery  has
become full.  The equalize charge rate shuld be approx. 2+ACU- of the battery
capacity.   This will tend to raise the battery voltage 1 to 1.5 volts above
the bulk charge setting.  The battery will gas.

Rich KF3DQ




--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Equalizing charge, Rich Gaarden <=