TenTec
[Top] [All Lists]

[TenTec] Heatsinks and fans.

To: <tentec@contesting.com>
Subject: [TenTec] Heatsinks and fans.
From: cherry@neta.com (Jim FitzSimons)
Date: Thu, 16 Mar 2000 11:44:15 -0700
Anthony, I went to Walgreens drug store and got a $10
fan that cools the Pegasus, Centaur, and my monitor.
If I am not careful it blows the papers on the floor also.
Best regards, Jim FitzSimons W7ANF

Anthony Bowyer wrote:
> 
>    For those of who who might be interested, I found
> that the fan and bracket assem. from a PS2 model 50
> fits on the Pegasus heatsink very well. Just needed to
> drill a hole on one end of the bracket and tread a
> 6-32 screw into it. Also had a piece of PC board
> material between the screw and the heat sink fin to
> prevent scratching. With a 92 ohm 2 watt resistor in
> series (it's 12v dc), the fan is very quite and keeps
> the heatsink cool. Probably some of those guys around
> for the asking.

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>