TenTec
[Top] [All Lists]

[TenTec] Re: Electret Mic voltage vs. Dynamic Mic

To: <tentec@contesting.com>
Subject: [TenTec] Re: Electret Mic voltage vs. Dynamic Mic
From: rod_pruner@yahoo.com (Rod Pruner)
Date: Thu, 20 Apr 2000 15:39:11 -0700 (PDT)
All,

Many thanks to all of you who responded to my
question. There are just too many to respond to
individualy. 
I've gathered a ton of info in a very short time. The
main item is the dynamic dosen't
want to see that +4 volts (which is really +10vdc) on
its dynamic element.
I could use a blocking cap but the exact value
would require some experimentation.
So, since I get on SSB VERY seldom, I've decided to
keep my TS-140s and MC-60 ready for SSB and
the Ten-Ten rigs will remain CW which is 98% of
my operation anyway.
Thanks to all again and 73.



=====
Rod Pruner - KN3ZOG
Conyers, GA  USA

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Re: Electret Mic voltage vs. Dynamic Mic, Rod Pruner <=