TenTec
[Top] [All Lists]

[TenTec] Corsair & Hercules II

To: <tentec@contesting.com>
Subject: [TenTec] Corsair & Hercules II
From: K2ZF@aol.com (K2ZF@aol.com)
Date: Tue, 22 Aug 2000 19:15:19 EDT
Hi everyone,
I acquired a Corsair 2 and am planning on mating it with my Hercules II 
amplifer. I have no problem understanding how to hook the EXT T/R to the 
Hercules. But on the rear of the Corsair there is a connector labeled, QSK. 

According to the manual,
This is an open collector output switched by the internally generated 
transmit (T) signal. This output will sink 100 ma max with 0.6 V voltage drop.

Does this QSK connector have anything to do with the amplifier connections ?
Will the EXT T/R drive the Herc full QSK ?, or is the QSK connector on the 
rear of the Corsair for that application ? Sorry if I sound tongue tied, but 
I would appreciate any help with the hookup.

Thanks to all, 73 de Jim   K2ZF

--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Corsair & Hercules II, K2ZF@aol.com <=