I think you are simply seeing the difference in ground loss between
two different locations/ground setups. If you increase your losses
enough, you will see an even wider bandwidth ...
For maximum bandwidth, get a poor ground system.
On Sun, 22 Oct 2000, Vincent A. Santis wrote:
> Hi,
>
> Just put up a new shiny Titan-DX. On my Omni VI+ it shows me acceptable swr
> from 3.85 to 4.0. Not supposed to do this, it only has about 100 khz
> bandwidth. However, on my som's TS-510DG (same house, same feedline, etc.)
> it shows only about a 100 khz bandwidth. Any ideas? Omni and 238 tuner
> meters are just about identical, and the tuner is on by-pass.
>
>
> Vince Santis, N1VS
> Winsted, CT
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/tentec
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
--
----------------------------------
E-Mail: $m
To: <tentec@contesting.com>
Date: $d
Time: $t
This message was sent by KMAIL under Linux - SuSE 7.0
-----------------------------------------------------
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|