TenTec
[Top] [All Lists]

[TenTec] Omni VI+ and Alpha 99 or 91B

To: <tentec@contesting.com>
Subject: [TenTec] Omni VI+ and Alpha 99 or 91B
From: wa0roi@arrl.net (Chuck Brudtkuhl)
Date: Mon, 29 Jan 2001 07:37:44 -0600
I am running the Alpha 99 with the Omni-VI+ ... a mere "plug
and play" operation.  I've used both the "standard" QSK
hookup and the "standard" non-QSK hookup ... and can't say
that I've noticed any difference!  The "keying relay" in my
VI+ is FAST (vs. the very s-l-o-w one in the Omni V) and the
amp does not "require" true QSK stepping.

For that matter, if I recall, Alpha states that from the
amp's perspective, the QSK stepping is not required ... and
that is how I ran mine for quite some time until I finally
got around to building the "QSK" cable (so I could use it in
QSK with the Omni-V).

73 de Chuck
wa0roi


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>