[Top] [All Lists]

[TenTec] QRP for Corsiar?

To: <tentec@contesting.com>
Subject: [TenTec] QRP for Corsiar?
From: k4cgy_list@yahoo.com (James C. Owen, III)
Date: Wed, 7 Feb 2001 18:27:39 -0800 (PST)

> --- "Dr. Gerald N. Johnson, electrical engineer"
> <geraldj@ames.net> wrote:
> > 
> > Set the ALC for low output, turn down the drive so the ALC
> led
> > only flashes --- I think the unmodified Corsair's (I and II)
> are >expected to reliably go down to 7 or 8 watts.
> > 
> >
 My Corsair II at minimum ALC setting and drive set to just get
 indication on the ALC LED has 18-20 watts output. Need to
 the resistor in series with the coarse ALC pot. This is the
 adjustment pot on the SWR board.
 73 Jim K4CGY

Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35 
a year!  http://personal.mail.yahoo.com/

FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com

<Prev in Thread] Current Thread [Next in Thread>