TenTec
[Top] [All Lists]

[TenTec] New Pegasus Features

To: <tentec@contesting.com>
Subject: [TenTec] New Pegasus Features
From: n4py@earthlink.net (Carl Moreschi)
Date: Wed, 21 Feb 2001 12:43:42 -0000
The new speech processor works very well for the Pegasus.  The speech
is unfortunately after the monitor output.  This means using the monitor
function
to set the speech processor will not work.  You must either listen to your
transmitted
signal in another receiver or have a friend talk you through its setup.

I have already integrated the noise blanker and speech processor into my
software
and will come out with the new version on March 1.

73,

Carl Moreschi  N4PY
Franklinton, North Carolina
n4py@earthlink.net
----- Original Message -----
From: "Ron McKean" <mckean@icx.net>
To: <tentec@contesting.com>
Sent: Wednesday, February 21, 2001 12:12 PM
Subject: [TenTec] New Pegasus Features


>
> I have installed the new flash upgrade and TT software.  I have monitored
> the signal and find no change with the speech processing, nor have I been
> able to eliminate any noise with the noise blanker (have not been able to
> find ignition noise so don't know if it will help that.  Am I completely
> insensitive to the change or are others experiencing the same.
>
> Ron McKean
> WD5FUN
> 775 Coulter Shoals Circle
> Lenoir City, TN 37772
> (865) 986-4908
> mckean@icx.net
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>