TenTec
[Top] [All Lists]

[TenTec] Fw: [Icom] 222 MHz transverter...Ten Tec ...are you listening ?

To: <tentec@contesting.com>
Subject: [TenTec] Fw: [Icom] 222 MHz transverter...Ten Tec ...are you listening ??
From: K3USC@worldnet.att.net (Brian Hemmis)
Date: Sat, 10 Mar 2001 10:34:50 -0500
There has been an on-going thread on the Icom group abt the need for an
inexpensive way to get on 222mhz. I know there is a limited market but how
much trouble would it be to make a 222 transverter to compliment your 6 and
2 meter series ? Brian K3USC

----- Original Message -----
From: <N3AWS@aol.com>
To: <icom@qth.net>
Sent: Saturday, March 10, 2001 10:28 AM
Subject: [Icom] 222 MHz transverter


> From: N3AWS@aol.com
>
> I was told that the 706 is the best selling ham rig of all time.  While
I'm
> not sure if that is true, certainly a lot of 706's were sold.  I doubt
that
> Icom is too interested in bringing to market a 222-225 MHz rig, because it
> would be directed primarily at a US market.
>
> But a transverter designed to augment the 706 might be a different story.
If
> it were similar to the Ten Tec ones for 6 and 2 meters, cost about
$200-250,
> and put out at least 10 watts, then for the price of an FM only rig, you'd
> have multimode capability, memories, etc.  I bet a lot of 706 users would
be
> interested.  And then there's the other rigs such as the FT100, etc that
> could be used with it--might begin to make up for the lack of a Japanese
> market....
>
> I would buy one--it would be a simple addition to my MKIIG that would add
> another band for VHF contests.
>
> 73,  Jim Walroth N3AWS
> ----
> Your Moderator: Dick Flanagan W6OLD, owner-icom@qth.net
> List Archives : http://www.qth.net/archive/icom/icom.html
> To unsubscribe: <mailto:majordomo@qth.net?body=unsubscribe%20icom>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>