TenTec
[Top] [All Lists]

[TenTec] Johnson Antenna Tuners article in Electric Radio, March 2001.

To: <tentec@contesting.com>
Subject: [TenTec] Johnson Antenna Tuners article in Electric Radio, March 2001.
From: SEWATKINS@dgs.state.va.us (Sherrill WATKINS)
Date: Thu, 05 Apr 2001 10:28:12 -0400
Several months ago, I was contacted by several people on this board who were 
interested in learning more about the E.F. Johnson Antenna tuners.  Please be 
advised that the March, 2001 (latest issue) of Electric Radio Magazine has a 
very interesting article describing both the 250 watt and kilowatt models. This 
is the only source I have ever seen that has actual side by side photographs of 
both units showing their rather massive internal components along with 
schematic diagrams of each.  The article also explains how to modify them to 
operate on 160 meters.  The author is using them to center-feed a 180 foot long 
hertz (dipole) antenna for use on his favorite bands of 160, 80 and 40 meters.  
I have not verified his math, but the author states that on 40 meters, a 180 
foot long dipole will act a double extended zepp and has 3 db gain and can be 
used as a dx antenna. This seems reasonable. (Note: the terminal impedance will 
not be anywhere near 50 ohms; probably closer to 1000 ohms and will have a 
large unknown reactive component so a tuner or matching stub is needed.)  The 
author is using common 450 ohm low loss ladder line to connect from the tuner 
to antenna.  The author's comments about using the Johnson tuners exactly 
duplicate my experience; except I used home made, unknown impedance - 5" 
spaced, open wire line with excellent results.  The tuners really work great 
for what they were designed to do, provide tremendous bandwidth ( 80 -10 meters 
operation) with very high efficiency using balanced feed to a dipole, hertz or 
any balanced type antenna.  They were not really intended to be used with 
coaxial cable, but can be modified to work with coax.  (I really discourage 
modifying them or the use of coax in this manner.)  I think the author said he 
is operating with about 300 to 500 watts of 100% plate modulated a.m. (his 
favorite mode) through them with no evidence of arcing or heating of the 
components.  I do not remember his name or call but this info. is in the 
article.  For anyone wanting to understand exactl
excellent book entitled  Reflections, Transmission Lines and Antennas  by Mr. 
Walter Maxwell or his series of six articles entitled "Another Look at 
Reflections" published in QST in the mid 1970's. - 73's- Corn - k4own.


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>