> Don't overlook the small stuff. Check and clean the auxiliary
> RX antenna switch. I've that switch give me problems in both
> my Corsair I and Omni V.
Thanks to all who have replied with suggestions for the indicated
problem. So far, the simple check above seems to have helped
loads! So, I won't go into the "freezing" of solder joints just yet.
If simply pushing that switch back and forth a few times has
helped, maybe that was the source of the problem. Will see.
Thanks again,
73, Jim, KH7M
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|