>From the "unofficial" Ten-Tec web page at http://www.qsl.net/tentec/
OMNI V QRP Mod
----------------------------------------------------------------------------
----
Mod: Provides a means lowering the power output to QRP levels.
Procedure:
Paul Clinton, Ten-Tec's Service Manager, advises to replace R46 on the 9 MHz
Filter Board from 100K-ohm to10K-ohm @ 1/4 watt. This brings the Omni V's
minimum output level to QRP.
-Paul, W9AC
----- Original Message -----
From: <jlivingo@webtv.net>
To: <tentec@contesting.com>
Sent: Friday, June 01, 2001 8:50 AM
Subject: [TenTec] OMNI V QRP Mod
>
> Folks, I recently bought an OMNI V with QRP Mod factory installed, but
> with no paperwork re: QRP mod. Can anyone provide details. Thanks,
> Jim, K4CFA
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/tentec
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|