Press and hold the LOCK button to bring up the menu.
You will see CHOOSE in the display.
Press 1. You will see ID OFF or ID ON, depending
upon the setting..
Press the ENTER key twice. You will see CCD ON or
CCD OFF, depending upon the setting. You will also
see the time displayed.
Just enter the correct time. After you enter the 4th
digit I believe you will hear a beep, and the time
will be set.
Press LOCK to return to the menue (CHOOSE).
Press LOCK again to exit the menu.
--
Mike - WB4HUC
Austin, TX
http://wb4huc.home.texas.net
----- Original Message -----
From: ben <benk8dit@serv.net>
To: <tentec@contesting.com>
Sent: Friday, June 01, 2001 10:20 PM
Subject: [TenTec] Omni VI Clock
>
> I just tried to adjust the clock on my Omni 6 option 1 upgrade. I could
find
> nothing except that when it was not an upgrade, there was a clk button,
> which is now my LP button. So, where and how
> do you adjust the clock? I must say that its only 30 seconds off and has
> been for the time I've owned it, a year and 3mos. So, is there a way to
> adjust the clock? TIA de ben K8DIT
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/tentec
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|