Last weekend my friend unplugged the cables from his FT1000D, removed it,
set my Omni vi+ into the same physical space, and reconnected the cables.
We determined the drive level which made his Alpha 87A happy. (Jay, that
plus a three antenna stack of 15 total elements is why I was loud on the net
last week.) He used the Omni and Alpha several times during the week, but
early on during IARU, I kept tripping the 87A out. I reduced drive to get
about 1000W out instead of 1500W, and had the same *intermittent* problem.
I would make several QSO's without difficulty, not change the band or
antenna direction, and suddenly the 87A would trip out. I soon noticed that
the forward and reflected power on the 87A jumped just as it kicked out.
Thinking maybe there was a loose connnection in the antenna system, I
changed from 40M to 15M with the same result. We uninstalled the Omni and
put his FT1000D back in place, and I operated the next 12 hours without
difficultly.
Another interpretation of the forward and reflected power surging would be
slow or poor ALC performance allowing a spike in the drive to the 87A
transiently harder. Does anyone have any experience with the Omni vi+ or
perhaps just generically with TenTec power amps and ALC driving an 87A which
is just loaded with protection circuitry?
73, John
P.S. the FT1000D is a fine rig, I just wanted to operate with my own rig for
psychologic reasons, so no comparisons please.
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|