TenTec
[Top] [All Lists]

[TenTec] Passband/ Omni 6+

To: <tentec@contesting.com>
Subject: [TenTec] Passband/ Omni 6+
From: w6hv@surfbest.net (w6hv@surfbest.net)
Date: Sat, 25 Aug 2001 19:17:38 -0700
Lew,
 Mine improved after adjustment of the osc. I used a good frequency counter
and set everything to specs.
 The next improvement (in my opinion) was to add both of the INRAD 2.8 Khz
filters.
73,
Troy, W6HV
----- Original Message -----
From: <LJL160@aol.com>
To: <tentec@contesting.com>
Sent: Saturday, August 25, 2001 10:28 AM
Subject: [TenTec] Passband/ Omni 6+


> Hi guys- Im crazy about my Omni 6+. I did notice that the USB pitch  and
> bandwidth is not symetrical to the LSB. USB is tighter sounding on receive
> and don't have quite the passband swing as lsb. It also dynamically sounds
a
> lil better on lsb.  Is it a pb align. if, or carrier osc. ?   I havent
> checked it out internally yet.  Anyone see or correct  this on theirs?
Thanks
> and 73s Lew K1NDV/ 80% cw !
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>


<Prev in Thread] Current Thread [Next in Thread>