That's a disappointment, but the market is tight on mobile rigs.
Considering Ten Tec's wonderful introduction into DSP software technology I
did have a dream of getting rid of my 706MKII in my Jeep and replacing it
with a Ten Tec DSP rig so I'd be
ALL Ten Tec!
Eric, KB9BGS/5
North Texas
----- Original Message -----
From: "Ten-Tec Inc. Amateur Radio Sales" <sales@tentec.com>
To: <tentec@contesting.com>
Sent: Monday, September 10, 2001 3:22 PM
Subject: Re: [TenTec] Scout Discontinued!
> At 06:20 PM 9/9/01 -0400, you wrote:
> >It's sad, but I guess time moves on. I'm sure going to hang onto my
Scout.
> >People who have Scouts but don't have all the band modules better start
> >buying them up. I'm sure they'll soon be really scarce.
> >73, Winston K4CWQ
>
> While the Scout is now discontinued, we will continue to manufacture
> and sell Scout band modules at least through the end of 2002. The
> 296 mobile bracket and 297 noise blanker are 'remaining stock only'
> and will be discontinued as soon as inventory is gone.
>
> Thanks to everyone who bought and used the Scout during the eight
> year run it was available. The Scout was the most popular transceiver
> Ten-Tec ever manufactured, but in the last 18 months or so our sales
> had dropped off and we didn't feel we could continue ordering
> parts in production quantity. No replacement transceiver is planned.
>
> Scott Robbins, W4PA
>
>
>
> -----------------------------------------------------------------
> Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
> Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
> Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
> Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
>
> --->--->---> Please note: E-mail <sales@tentec.com> for sales
> and general product info only. We presently do not offer
> repair, parts, or kit building tech support by electronic mail,
> please telephone (865) 428-0364 or (865) 453-7172.
>
> Ten-Tec manufactures amateur radio equipment, military and com-
> mercial use HF radio equipment, custom aluminum and steel
> enclosures and has an on-premises, fully equipped tool and die
> facility supplying metal and plastic injection mold industries.
> Potential tool and die, custom enclosure or communications
> electronics customer? Contact us with your needs.
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|