This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
----__JNP_000_0ba4.618a.23ed
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi Ken;
Mine shows "Power-Mite" on the front and PM2 stamped on the rear.
However, it is supposed to be a PM-3, since it covers 80-4020 meters. I
beleive the 1 covered 80-40 and the 2 covered 80-40-15 meters.
We had an enjoyable time at the Ten-Tec H'Fest over the weekend.
73,
Jim, K4SQR
On Fri, 28 Sep 2001 21:24:18 -0600 "Ken Link" <linkcom@prodigy.net>
writes:
I have what appears to be a PM-1. On the front is silk-screened "Model PM
1", and on the bottom inside it is stamped "Powermite 1". However, on the
back it is stamped "PM2". I guess my confusion is in the Ten Tec ads I
have seen seem to indicate a PM-1 did not come with a case, but a PM-2
did. Any of you collectors know if an early PM-2 was really just a PM-1
with a case?
Thanks,
Ken, NB7I
Jim Miller, K4SQR
http://www.comteksystems.com
4-Square Experts, Stack Yagi
& Remote Antenna Switching Systems
----__JNP_000_0ba4.618a.23ed
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4134.100" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>Hi Ken;</DIV>
<DIV> </DIV>
<DIV>Mine shows "Power-Mite" on the front and PM2 stamped on the rear. =
However,=20
it is supposed to be a PM-3, since it covers 80-4020 meters. I beleive the=
=20
1 covered 80-40 and the 2 covered 80-40-15 meters.</DIV>
<DIV> </DIV>
<DIV>We had an enjoyable time at the Ten-Tec H'Fest over the weekend.</DIV>
<DIV> </DIV>
<DIV>73,</DIV>
<DIV>Jim, K4SQR</DIV>
<DIV> </DIV>
<DIV>On Fri, 28 Sep 2001 21:24:18 -0600 "Ken Link" <<A=20
href=3D"mailto:linkcom@prodigy.net";>linkcom@prodigy.net</A>> writes:</=
DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-LEFT: 10px; MARGIN-LEFT: 10px; BORDER-LEFT: #000000 2px =
solid">
<DIV><FONT size=3D2>I have what appears to be a PM-1. On the front is=20
silk-screened "Model PM 1", and on the bottom inside it is stamped "=
Powermite=20
1". However, on the back it is stamped "PM2". I guess my confusion is in =
the=20
Ten Tec ads I have seen seem to indicate a PM-1 did not come with a case,=
but=20
a PM-2 did. Any of you collectors know if an early PM-2 was really just a=
PM-1=20
with a case?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=3D2>Thanks, </FONT></DIV>
<DIV><FONT size=3D2>Ken, NB7I</FONT></DIV>
<DIV> </DIV></BLOCKQUOTE><BR>Jim Miller,=20
K4SQR<BR>http://www.comteksystems.com<BR>4-Square Experts, Stack Yagi<BR>&=
amp;=20
Remote Antenna Switching Systems<BR></BODY></HTML>
----__JNP_000_0ba4.618a.23ed--
|