[TenTec] Scout problems

To:	<tentec@contesting.com>
Subject:	[TenTec] Scout problems
From:	rohre@arlut.utexas.edu (Stuart Rohre)
Date:	Fri, 26 Oct 2001 19:15:01 -0500

I believe the original Bob who posted on Scout display jumping around later
posted he found bad plug in connection of the band modules, he could not
plug them in all the way.

This could be a mechanical problem of the guide and slot used on the
modules, and I sent him some things to check and fixes for tight modules,
mainly you put a Little grease on the track to ease them in!
73,
Stuart K5KVH

<Prev in Thread]	Current Thread	[Next in Thread>
[TenTec] Scout problems, robert k stephens [TenTec] Scout problems, Mike Hyder [TenTec] Scout problems, Ben Kadish K8DIT [TenTec] Scout problems, Stuart Rohre [TenTec] Scout problems, Bob, WB2VUF [TenTec] Scout problems, Stuart Rohre <= [TenTec] Scout problems, Bob, WB2VUF [TenTec] Scout problems, ultrafixedwing@juno.com [TenTec] Scout problems, Stuart Rohre [TenTec] Scout problems, Mike Hyder [TenTec] Scout problems, Stuart Rohre [TenTec] Scout problems, Mike Hyder [TenTec] Scout problems, Stuart Rohre [TenTec] Scout problems, Bob, WB2VUF

Previous by Date:	[TenTec] RX-320 Distortion Solved, Rick Williams
Next by Date:	[TenTec] Model 526 Audio Problem, Amateur Radio Station W5CIA
Previous by Thread:	[TenTec] Scout problems, Bob, WB2VUF
Next by Thread:	[TenTec] Scout problems, Bob, WB2VUF
Indexes:	[Date] [Thread] [Top] [All Lists]