TenTec
[Top] [All Lists]

[TenTec] Delta 580 + Amplifier QSK

To: <tentec@contesting.com>
Subject: [TenTec] Delta 580 + Amplifier QSK
From: radions@neteze.com (Warren & Barbara Reese)
Date: Mon, 29 Oct 2001 08:00:00 -0800
Dear Fellow Ten Tec users.

I have a Delta I (580) and a home brew pair of 811A's amplifier.  Has
anyone on the reflector set up a QSK system with something like this?

I'm especially interested in operating SSB on VOX.  The Delta has a relay
that I can use to key the amp, but I think if I'm in VOX, when I start
talking the Delta is generating RF and it will go into the open contacts in
the amplifier until the relay switches over.  This is BAD sequencing -
every transmission the Delta will look into an open load for a few
milliseconds.  I know it's protected, but this is not the way to go.

Any suggestions?

Thanks & Very 73,

TR - WB6TMY@arrl.net


 Warren & Barbara Reese

 Primary: WB6TMY@arrl.net
 Secondary: Radions@neteze.com
 Web: http://www.neteze.com/radions/

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Delta 580 + Amplifier QSK, Warren & Barbara Reese <=