[TenTec] Pegasus / Omni V and RigBlaster

[geraldj@isunet.net (Dr. Gerald N. Johnson, electrical engineer)]

The source and load impedances are different. Worked out with the
relative high impedance of the microphone that the two radio with
different load impedances worked with the same. The output impedance of
the buffer in the RigBlaster is probably considerably lower than the
microphone's impedance so the different load impedances of the radios
lead to different drive levels.

73, Jerry, K0CQ

-- 
Entire content copyright Dr. Gerald N. Johnson. Reproduction by
permission only.