Now that would be great! Especially if the front of the speaker cabinet is
moulded like the front panel of the Jupiter so that it is a
true matching speaker. If so, I definetly will buy one.
Dan
"Ten-Tec Inc.
Amateur Radio To: tentec@contesting.com
Sales" cc:
<sales@tentec.com Subject: Re: [TenTec] Ten-Tec
External Speaker
>
Sent by:
tentec-admin@cont
esting.com
01/21/2002 08:40
AM
Hi Folks:
Relevant to the discussion on external speakers - we're working now
on a line of quality external speakers for use with our amateur radio
equipment and communications receivers. I don't have pictures,
descriptions, or specs, but these should be out and available shortly
likely in at least a couple of different colors to match our various HF
equipment. Stay tuned. They'll be available this spring.
Scott Robbins, W4PA
Amateur Radio Product Manager
At 10:03 PM 1/20/02 -0500, you wrote:
>Dave/wa6ccqj wrote----
>
>I would like to know if any has found a really good sounding external
>speaker for the Ten Tec Jupiter.
>
>Dave when I had my Jupiter I used an old Heathkit SB-600 speaker. It gave
>great audio, I now use it on my Omni VI Plus. The Drake MS 4 has been
>reported to have good audio with Ten-Tec rigs however I have not tried it.
>
>I traded the Jupiter for a Pegasus and use the LINE OUT to the computer
>sound card with great results. I think the Jupiter has the LINE OUT on it
>and you may want to try the computer sound card. So far that gives me the
>best audio.
>
>On my Omni C I use the MFJ 281 CLEAR TONE Speaker with good results
however
>if I could find a good Heathkit SB-600 Speaker I would put it on the old
>Omni C.
>
>Good luck on this, it is the only complaint I have with Ten-Tec
>transceivers.
>
>Ken/w8keb
>Flushing, Ohio
>w8keb@arrl.net
>
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
-----------------------------------------------------------------
Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
--->--->---> Please note: E-mail <sales@tentec.com> for sales
and general product info only. We presently do not offer
repair, parts, or kit building tech support by electronic mail,
please telephone (865) 428-0364 or (865) 453-7172.
Ten-Tec manufactures amateur radio equipment, military and com-
mercial use HF radio equipment, custom aluminum and steel
enclosures and has an on-premises, fully equipped tool and die
facility supplying metal and plastic injection mold industries.
Potential tool and die, custom enclosure or communications
electronics customer? Contact us with your needs.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|