I also found the correct Jupiter file 1.14 in the RX350 download. It worked
with my Jupiter. I guess Ten-Tec put the file in the wrong place.
73, Winston K4CWQ
----- Original Message -----
From: <duffyb01@fuse.net>
To: "Dudley Hurry" <jhurry@austin.rr.com>; <tentec@contesting.com>
Sent: Friday, February 08, 2002 13:16 PM
Subject: Re: Re: [TenTec] Jupiter 1.14 Update??
> Well apparently the way TT released the firmware is that all the versions
for their various products seem to be in the same download. There were 4
different .ruf files with the RX350 download. The Jupiter was amoung them.
When downloading from the Jupiter url, it only had three and the Jupiter
.ruf file was 1.12. I used the Jupiter 1.14 .ruf that came with the RS350
and it worked perfect.
>
> Kind of moot now since TT just released 1.15 to correct a bug. Here we go
again.
>
> Duffy - WB8NUT
>
> >
> > From: "Dudley Hurry" <jhurry@austin.rr.com>
To: <tentec@contesting.com>
> > Date: 2002/02/08 Fri AM 09:44:54 EST
> > To: <tentec@contesting.com>
> > Subject: Re: [TenTec] Jupiter 1.14 Update??
> >
> > I'm not sure that the RX-350 .ruf would contain all that is needed for
the
> > Jupiter. I think that I will wait for Ten Tec to correct their problem
or
> > the next version. Version 1.12 seems to operate fine, except for AM
with
> > N4PY SW and the Noise Blanker, which could be a contained within N4PY
SW..
> >
> > Thanks and 73's,
> > Dudley
> > WA5QPZ
> > jhurry@austin.rr.com
> >
> >
> >
> > ----- Original Message -----
> > From: "J. Duffy Beischel" <duffyb01@fuse.net>
> > To: <tentec@contesting.com>; "Dudley Hurry" <jhurry@austin.rr.com>
> > Sent: Friday, February 08, 2002 6:23 AM
> > Subject: Re: [TenTec] Jupiter 1.14 Update??
> >
> >
> > > They did leave it out of the Jupiter update. Dowload the update for
the
> > RX-350. The
> > > 1.14 firmware update for the Jupiter can be found in that download.
That
> > is what I did to
> > > load 1.14 to my Jupiter. It will read 1.14 on the start up screen
after
> > that flash.
> > >
> > > Duffy - WB8NUT
> > >
> > > 2/8/02 2:36:41 AM, "Dudley Hurry" <jhurry@austin.rr.com> wrote:
> > >
> > > >If you notice after "updating" your Jupiter, it may still say the
> > previous
> > > >version that was there before at power up.... I noticed that the
> > > >"538V1140.ruf" file is missing.. I had flashed eariler to version
1.12,
> > > >and the radio still says 1.12.. I think Ten-Tec left the file out..
> > > >
> > > >Thanks and 73's,
> > > >Dudley
> > > >WA5QPZ
> > > >jhurry@austin.rr.com
> > > >
> > > >
> > > >
> > > >_______________________________________________
> > > >TenTec mailing list
> > > >TenTec@contesting.com
> > > >http://lists.contesting.com/mailman/listinfo/tentec
> > > >
> > >
> > >
> > >
> > > ______________________________________________________________________
> > > J. Duffy Beischel - Amateur Radio WB8NUT
> > >
> > > Member of: ARRL, NRA, Kiwanis, Republican Party, Masons, and Shriners
> > > and the vast Right Wing conspiracy to get the Clintons
> > >
> > > "If the government owned all the guns, would we still be a free
people?"
> > > ______________________________________________________________________
> > >
> > >
> > >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|