[TenTec] Less than 1.5 to 1 Match

[ARDUJENSKI@aol.com (ARDUJENSKI@aol.com)]

Reading the Jupiter posts a comment was made that there is not a big 
difference between 1 to 1 and 1.5 to 1. Although loss wise I agree but both 
the OMNI D and my CORSAIR have a tendency to trip off if I operated SSB near 
the 100watts without a near 1to 1 match. Is this normal or do I have  bad or 
overly sensitive breaker(s)?

Radios are properly grounded. 

Both radios run with matching PS and have 229 tuner

Alan KB7MBI in Woodinville, WA
FISTS 5702  Proud member of ARRL