TenTec
[Top] [All Lists]

[TenTec] Cable to connect 405 amp to 509 ?????

To: <tentec@contesting.com>
Subject: [TenTec] Cable to connect 405 amp to 509 ?????
From: Winston F. Jones" <winjones@ix.netcom.com (Winston F. Jones)
Date: Thu, 20 Jun 2002 08:04:28 -0400
The only connection between the 509 and 405 is the RF output from the 509
antenna to the 405 input. I use a piece of RG-174 (small 50-ohm coax) with
phono (RCA) plugs on each end. You could use a piece of RG-58 coax. It
you're missing the DC power cable from the back, you will need the 4-pin
power plug. I think it's called a Jones plug.
73, winston  K4CWQ

----- Original Message -----
From: "George Osier" <gosier@twcny.rr.com>
To: <TenTec@contesting.com>
Sent: Thursday, June 20, 2002 1:51 AM
Subject: [TenTec] Cable to connect 405 amp to 509 ?????


> Hello All !!!!!
>
> Looking for a cable or wire with connectors to hook up the 405 to the 509
> ........ Or any ideas on how to make one ??????
>
> 73s
>
> George Osier , N2JNZ / QRP
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec


<Prev in Thread] Current Thread [Next in Thread>