TenTec
[Top] [All Lists]

[TenTec] Scout Help

To: <tentec@contesting.com>
Subject: [TenTec] Scout Help
From: k4cgy_list@yahoo.com (James C. Owen, III)
Date: Wed, 3 Jul 2002 07:05:54 -0700 (PDT)
Hi Allen,
   The simple answer to both of your questions is YES.  There is
a little audio feedthrough to the speaker but I never found it to
be a real problem with a speaker, becomes more anoying with
headphones. I'm not sure if there is a fix for this.

   The VFO is pretty stiff and it takes a lot of twisting to go
from one end of a band to the other. This is my mail gripe about
the rig. I've been looking for a knob with a crank or at least a
finger  hole but haven't found one small enough. We need one
that's not more thatn 1.5 inches.

   The other "problem" ? I've had is that there are a couple of
frequencies that the gate signal from the counter causes a beep,
beep and of course it's always on a frequency you want to
monitor.
The one that bothers me is 14.336 the county hunters frequency.
There is a way to cure it on SSB and that is to switch to the
speed setting, this way it moves the gate frequency to a
different spot. The VFO is now always unlocked but mine never
drifts after a 15 minute warmup. I can leave it on all day and
not touch it.

73 Jim K4CGY
--- - <AE0Z@compuserve.com> wrote:
> I just acquired a very nice Scout and have a couple of
> questions...
> 
> Is it normal to have some "feedback" thru the speaker when you
> modulate the
> unit with the microphone (occurs in antenna or dummy load). 
 
> Is the PTO knob usually fairly "stiff"?  (Possible is this an
> intentional
> drag to keep things on freq during mobile operation, etc.?)

> Allen Bush, AE0Z
> 
> _______________________________________________
> 


__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com

<Prev in Thread] Current Thread [Next in Thread>