Yes, 12 watts to 100 watts, depending on the setting of the RF PWR knob.
73 de K8HJ
John
----- Original Message -----
From: "Al Scanandoah" <k2zn@rochester.rr.com>
To: "John Huffman" <hjohnc@core.com>
Sent: Friday, July 05, 2002 12:22 PM
Subject: Re: [TenTec] Omni V QRP Mod.
> Is there any power out?
>
> John Huffman wrote:
> >
> > Al -
> >
> > In TUNE or CW the ALC stays lit at all power levels on my Omni V. What
am I
> > doing wrong?
> >
> > 73 de K8HJ
> > John
> >
> > ----- Original Message -----
> > From: "Al Scanandoah" <k2zn@rochester.rr.com>
> > To: "John Huffman" <hjohnc@core.com>
> > Sent: Friday, July 05, 2002 10:48 AM
> > Subject: Re: [TenTec] Omni V QRP Mod.
> >
> > > John
> > >
> > > Here's how I reset the ALC in my Omni V:
> > >
> > > Key up in CW or TUNE into a dummy load and increase the power level to
> > > read 100 watts (if possible).
> > >
> > > If you can't obtain 100w, adjust the ALC pot until it reaches that
> > > level.
> > >
> > > If you can reach 100w and the ALC light isn't illuminated, adjust the
> > > ALC pot until the light comes full brilliance.
> > >
> > > You may have to jockey the adjustments on the ALC pot and RF PWR
control
> > > to reliably achieve 100w.
> > >
> > > 73 - Al, K2ZN
> > >
> > > John Huffman wrote:
> > > >
> > > > I found a message on modifying the Omni V for QRP. But, I have a
> > question.
> > > >
> > > > The mod is, "R46 change from 100 to 10 kohms, then reset R48, the
ALC
> > pot."
> > > >
> > > > My question, how do I reset R48, the ALC pot?
> > > >
> > > > TIA es 73 de K8HJ
> > > > John
> > > >
> > > > --- StripMime Report -- processed MIME parts ---
> > > > multipart/alternative
> > > > text/plain (text body -- kept)
> > > > text/html
> > > > ---
> > > > _______________________________________________
> > > > TenTec mailing list
> > > > TenTec@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
>
|