TenTec
[Top] [All Lists]

[TenTec] Bottom area of Jupiter display - radio locks up

To: <tentec@contesting.com>
Subject: [TenTec] Bottom area of Jupiter display - radio locks up
From: mnewell1@austin.rr.com (Michael A. Newell, WB4HUC)
Date: Sat, 24 Aug 2002 17:54:31 -0500
Try this:

(Do these steps one after the other, immediately,
  with no hesitation between them).

Press SWEEP. Get a sweep display.
Press STEP.
Press STEP.
Press SWEEP (clears SWEEP display)
Press SWEEP (get another SWEEP display)
Press STEP.
Press STEP.

Does the audio become mute and the radio then
emit a high pitched whine?

Do the buttons work, but the knobs don't?

Do you have to turn the radio off then on to
clear it up?

Will the Orion behave this erratically? I hope not.

73,

Mike - WB4HUC




----- Original Message -----
From: "Joe Malloy" <jmalloy@hamilton.edu>
To: "Michael A. Newell, WB4HUC" <mnewell1@austin.rr.com>; "tentec"
<tentec@contesting.com>
Sent: Saturday, August 24, 2002 4:31 PM
Subject: RE: [TenTec] Bottom area of Jupiter display


> And ditto here, too - I guess this is another software bug that will have
to
> be swatted.  Otherwise, though, I don't notice anything else wrong.  I'm
> keeping 1.21 primarily because I don't use the sweep function all that
> often.
>
> 73,
>
> Joe, W2RBA
>
> > -----Original Message-----
> > From: tentec-admin@contesting.com [mailto:tentec-admin@contesting.com]On
> > Behalf Of Michael A. Newell, WB4HUC
> > Sent: Saturday, August 24, 2002 4:54 PM
> > To: tentec
> > Subject: [TenTec] Bottom area of Jupiter display
> >
> >
> > Can anyone else try something and let me know what happens?
> >
> > Press the front panel SWEEP button to get a spectrum sweep display.
> > Press the STEP button.
> > Press the STEP button again.
> >
> > Is the lower part of the LCD screen (below the spectrum display)
> > filled in solid all the way across?
> >
>
>


<Prev in Thread] Current Thread [Next in Thread>