Please pardon my reply to the list- The mailing address didn't necessarily
look legitimate, nor does it look like it's going to the correct place, but
I'll throw in my 0.02...
Hello whoever you are...
Check the wiring connections on the fuse holder. If they're poor, they'll
generate heat which percolates into the fuseholder, melting the fuse
element. You also may have a shorted transformer winding which is causing
higher-than-anticipated current draw through the primary.
DK :-)
>>Hi all
>> I have a very interesting problem with my SB-1000 Heathkit .....This is the
>>same amp as the ameritron AL80a with a single 3-500z
>>
>>Hears what happen.... I turn the amp on to use it, Talk on it for a few
>>minutes, The amp blows the fuse for no reason while in receive... no pops,
>>cracks, nothing ...
73's from KW0D Dave in LeClaire, Iowa
|