Version 2.04 of my Pegasus/Jupiter control program is now available
to registered users. If you are a registered user, you should now have it.
Among other things the highlites of the new version are
1)
The operation of the TX Slider is now different when a transverter
is in use. The drive power specified in the settings menu for the
transverter in use now sets the maximum drive power for that particular
transverter. This also changes the scale of the TX slider such
that full up on the TX slider corresponds to this maximum drive
power. This prevents accidental overdrive to the transverter
if the TX slider is moved by mistake.
2)
Enhanced the user transverter algorithm to allow transverters
for frequencies below the AM broadcast band.
3)
Memory scan is now stopped if a transmission occurs. There is a
new parameter in "Preferences4" to allow the scan to be automatically
restarted. See the "Scan" section and "Preferences4" section.
4)
The "EXT-T/R" slider now has independent settings for CW mode
verses all other modes. When you set this slider in CW, it will
remember the non-CW mode setting. This allows separate values
for CW and SSB modes.
5)
Added "LO CUT" and "HI CUT" buttons to the center of the radio
panel. These buttons are only active in SSB mode. They only
appear when the main tuning knob option is not selected. See
"Main Tuning Knob Configuration" in "pegasus.txt".
6)
Added a way to operate the LDG external auto tuner AT-11MP with the
pegasus and Jupiter. See the section on "External tuner" in pegasus.txt.
Thanks to Mark Erbaugh, N8ME, for information on this feature.
Carl Moreschi N4PY
Franklinton, NC
|