TenTec
[Top] [All Lists]

[TenTec] Re: [Ten-Tec516] Losing Memories

To: <tentec@contesting.com>
Subject: [TenTec] Re: [Ten-Tec516] Losing Memories
From: tranda@cox.net (Tim Randa)
Date: Tue, 3 Dec 2002 11:18:42 -0600
Geezzz...

Can you blame me???  Maybe instead of taking a poke at me like you did you
could take the time and start addressing the concerns of very knowledgeable
operators.

Sometimes the true hurts.

de KØFL

----- Original Message -----
From: "Ten-Tec Inc. Amateur Radio Sales" <sales@tentec.com>
To: "Tim Randa" <tranda@cox.net>
Sent: Tuesday, December 03, 2002 9:08 AM
Subject: Re: [TenTec] Re: [Ten-Tec516] Losing Memories


Thanks Tim.

73
Scott Robbins

At 06:49 PM 11/29/02 -0600, you wrote:
>Glad I waited to buy what turned out to be the Argobug V till after the
real
>reports started coming in. I knew the oooohs  and ahhhh's would end sooner
>or later.
>de KØFL
>
>----- Original Message -----
>From: "jim danehy" <jdanehy@cinci.rr.com>
>To: <Ten-Tec516@yahoogroups.com>
>Sent: Friday, November 29, 2002 6:20 PM
>Subject: Re: [Ten-Tec516] Losing Memories
>
>
>ME TOO.  I just thought I did not do things properly
>
>W9VNE
>Jim Danehy
>Cincinnati, Ohio, USA
>-84° 21' 29" W
>39° 03' 33" N
>   ----- Original Message -----
>   From: w4jz
>   To: Ten-Tec516@yahoogroups.com
>   Sent: Friday, November 29, 2002 4:03 PM
>   Subject: [Ten-Tec516] Losing Memories
>
>
>   This now has happened twice.  Once Tuesday & today.  When first
>   turning rig on I lose ALL memories.  As if I never entered any.
>
>   Power supply, Astron RS-35A, turn on first then rig. It was turned on
>   this way Tuesday.  I have a MFJ High Current DC outlet which has an
>   on/off switch.  I, today, turn power supply on, then switch, then
>   rig.  Lost memories again.
>
>   I did a master reset & will see what happens.  Glad I don't have no
>   more than 9 memories.
>
>   Wonder if anybody else has seen this?
>
>   Reed  W4JZ
>
>
>
>         Yahoo! Groups Sponsor
>               ADVERTISEMENT
>
>
>
>
>   To unsubscribe from this group, send an email to:
>   Ten-Tec516-unsubscribe@yahoogroups.com
>
>
>
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>[Non-text portions of this message have been removed]
>
>
>To unsubscribe from this group, send an email to:
>Ten-Tec516-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec


-----------------------------------------------------------------
Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
   Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
   Repair (865) 428-0364 8-4.  Sales (800) 833-7373 9 am-5:30 pm.
   Fax (865) 428-4483 24 hrs.  Visit us at <http://www.tentec.com>
   Email:  New product sales/product info         sales@tentec.com
              Service department                         service@tentec.com
   While we make every effort to answer email in an expedient manner,
   the telephone is a much more efficient tool for getting a quicker and
   more complete answer to your inquiries.  Thanks!




<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Re: [Ten-Tec516] Losing Memories, Tim Randa <=