TenTec
[Top] [All Lists]

[TenTec] Help with RFI problem, Thanks to all

To: <tentec@contesting.com>
Subject: [TenTec] Help with RFI problem, Thanks to all
From: w5yr@att.net (George, W5YR)
Date: Sun, 8 Dec 2002 11:26:36 -0600
Just a caution that some monitors may have problems with the higher
refresh rates. Good idea to verify with the monitor specs that the
combination of resolution and refresh rate is acceptable.

73/72, George
Amateur Radio W5YR -  the Yellow Rose of Texas
In the 57th year and it just keeps getting better!
Fairview, TX 30 mi NE of Dallas in Collin county EM13qe
K2 #489  IC-765 #2349 IC-756 PRO  #2121 IC-756 PRO2 #03235

----- Original Message -----
From: "Steve" <sswhite@mchsi.com>
To: "Bill" <florida.investigative@verizon.net>; "Tentec Reflector"
<tentec@contesting.com>
Sent: Sunday, December 08, 2002 11:21 AM
Subject: Re: [TenTec] Help with RFI problem, Thanks to all


> I tried the same trick by changing my refresh to 75 and it helped a
lot, I
> then upped it to 85 and it helped even more and finally I am at 100
hz and
> all the noise that I was seeing around the 14.070 and other places
is now
> gone...  Give him a Cuban Cigar!!!!



<Prev in Thread] Current Thread [Next in Thread>