On 27 Dec 2002 at 8:24, donnie garrett wrote:
> That is what a well designed AGC circuit is for. Any well-designed AGC
> circuit should allow you to be able to receive a 25-35 db over S-9 signal
> with no noticeable distortion. If you need to switch in the attenuator
on a
> 30 db over S-9 signal then the AGC circuit needs some improving.
Possibly a
> simple improvement could be made by changing the actual AGC threshold
point
> just a little by the firmware's engineering department. Don / WA9TGT
>
I would not expect it. I notice the receive distortion with the new Argo
516, also. Unfortunately, no RF gain control, so the attenuator is the
only option.
---
+-++-++-++-++-+ John L. Sielke
|W||2||A||G||N| http://www.w2agn.net [UPDATED]
+-++-++-++-++-+ Ex-K3HLU,TF2WKT,W7JEF,W4MPC,N4JS
|