Ernie,
Try increasing the TUNE output power. 15w seems a little low, try 20 to 30
watts.
73,
Mark
----- Original Message -----
From: "Ernest Mills" <emills@nycap.rr.com>
To: <tentec@contesting.com>
Sent: Saturday, February 15, 2003 14:05 PM
Subject: [TenTec] Pegasus Tuner help
> Need Help!
> I have a Pegasus with the LDG P11 int. tuner with N4PY interface. On
20 meters only I get no auto tune action at all. ie. Auto tune does not go
through it's "relay adjusting" mode. Also when trying to adjust it manually
by clicking the CAP or IND buttons. there is no response at all. ie No
relays click. Different antennas act the same.
> With the int. tuner disabled. The G5RV shows. 15w FORward, 1w
REVerse, 1.0 SWR
> The Loop (known balun problem here) shows 15w FORward, 3w REVerse and
2.44 SWR
> The loop has a known problem but I think both show the rig is working
eh!
>
> Does this indicate a faulty LDG Tuner? Any ideas? Ernie
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|