> However, the macros as stated in John's posting were written for the Icom
> IC-756PRO and PRO2 CI-V command sets. I am very surprised that
> the Omni Vi
> and PROs share a common command language.
George had posted a similar macro for his 756 Pro, I just copied the idea
and made it work for the Omni VI.
For those of you who are running software that doesn't support the Ten-Tec
Omni VI (like MixW) choose 'Icom 735' and you will be okay.
The Ten-Tec Omni command set is a superset of that of the IC-735. I don't
believe you can control xmit/rcv via software for the IC-735, for instance.
There are other commands (some mentioned in the Ten-Tec Omni VI manual, some
not... like how to select the narrow filter) available for the
intellectually curious.
- jgc
John Clifford KD7KGX
Heathkit HW-9 WARC/HFT-9/HM-9
Elecraft K2 #1678 /KSB2/KIO2/KBT2/KAT2/KNB2/KAF2/KPA100
Ten-Tec Omni VI/Opt1
email: kd7kgx@arrl.net
|