Re: [TenTec] Scout Power setting mods

["Stuart Rohre" <rohre@arlut.utexas.edu>]

The simplest power setting remoting mod is to unsolder the internal pot used
to set power thru screwdriver hole on bottom of radio.

Run three conductor flat cable from the 3 holes on board out the back panel.
Mount a bracket there to hold the pot, or sub a thru panel small linear pot
for the original.  Mount a knob or use screw driver adjustment, and you have
it.

The 3 conductor flat cable in 26 gauge easily goes thru the space between
the cover and back panel.
73,
Stuart K5KVH