[TenTec] RFI on the 302 pod

To:	<tentec@contesting.com>
Subject:	[TenTec] RFI on the 302 pod
From:	wa2pvk@msn.com (WILLIAM MANSEY)
Date:	Mon Jun 2 21:16:24 2003

Hi Bill, Try making a small loop in the remote pods cable IF the ferrite
bead will accommodate the thickness.  That is what I did.  The loop was only
about 2" across.  The other thing is to play with the location of the bead
and loop.  This should solve your problem or at least a large portion of it.
Good Luck & 73, Bill
wa2pvk@msn.com Please visit my home page: http://mysite.verizon.net/wa2pvk

<Prev in Thread]	Current Thread	[Next in Thread>
[TenTec] Future TT projects, Adam Farson [TenTec] Future TT projects, tongaloa [TenTec] Future TT projects, George, W5YR [TenTec] Future TT projects, Dr. Gerald N. Johnson, electrical engineer [TenTec] Future TT projects, WILLIAM MANSEY [TenTec] RFI on the 302 pod, Bill Fulling [TenTec] RFI on the 302 pod, WILLIAM MANSEY <= [TenTec] Future TT projects, Ron Notarius WN3VAW [TenTec] Future TT projects, Dr. Gerald N. Johnson, electrical engineer [TenTec] Future TT projects, Ron Notarius WN3VAW [TenTec] Future TT projects, tongaloa

Previous by Date:	[TenTec] FS or Trade: TenTec 1210 Transverter (10m to 2m), Patrick Gardella
Next by Date:	[TenTec] 9420 P/S for Herc II, M.Todd Miskel
Previous by Thread:	[TenTec] RFI on the 302 pod, Bill Fulling
Next by Thread:	[TenTec] Future TT projects, Ron Notarius WN3VAW
Indexes:	[Date] [Thread] [Top] [All Lists]