[TenTec] Lowpas filter for 60m

["Harry Coates" <WA8HC@att.net>]

Duane,
Your note is very timely.. I had the same question tonight on the 7.251 net, 
and no one had the answer..  
The schematic shows two 40m  LP filters.. One designated 40m and one designated 
40/30m.. Since the manual does not explain this, I had to assume the firmware 
decided which was used for 40m CW or 40m SSB and the 30m band.. The first 40m 
LP filter must have been assigned to the 60m band in 
V 1.19 firmware which we are probably all using.. Makes sense to me.. Nice 
posting.
Duane, you did good!! 
'73

Harry N. Coates
WA8HC@att.net