Hi Duffy,
Well, I just set up Mix to control my Orion as you suggested (used 57k6
bps, RTS always on, DTR PTT+CW but will also try PTT via CAT) and I can
command the Orion! It appears to be one way, i.e. MixW32 does not catch
when I change the frequency with the main dial or aux dial so perhaps Mix
is not polling the Orion. But the wheel mouse does work so I will just
leave the dials alone.
Now to test being able to transmitt! After rewriting my macros to remove
the FT-1000MP Mk V commands and see if Orion commands work!!!
Thanks for the info.
73, Tom N4ZPT
On Wed, 30 Jul 2003 10:41:20 -0400, <duffyb01@fuse.net> wrote:
> I sent Nick an email about enhancing MixW to control the Orion and the
> Argonaut V. I also sent him files related to the PC control of the Orion
> and the Argo. This is what Nick said:
>
>>>> Hello Duffy,
> Please try "Jupiter (enhanced PC control) with
> Argonaut - V and ORION
> The documentation says that Jupiter, ORION and Argonaut have same
> commands
> for frequency and mode control.
> Please let me know the result.<<<
>
> O.K., so I tried it as suggested with the Argonaut V and simply cannot
> get it to work. I have used the same settings that I use with my Jupiter
> and MixW is simply unable to control the Argo. Can anyone else give this
> a shot? Does anyone else have any suggestions as to why it is not
> working? The N4PY software works perfect with the Argo, but cannot get
> the same result with MixW.
>
> Anyone up to the challenge?
>
> Regards,
>
> Duffy
> www.wb8nut.com
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
--
Tom Azlin, N4ZPT
|