Tom it's been a while but here goes.
The RX-320 antenna plugs into the Omni V auxiliary antenna jack. This
antenna is muted during transmit (RX/TRX switch in the TRX position). The
only other hardware required was a relay to mute the RX-320 speaker during
transmit. I used a N/C SPST and it switches with one side of the relay coil
at 12 volts and the other side hooked to the Omni V.9 TX OUT line (I
think). I put in a "Y" connector to allow it to be used with the Hercules
II as well.
Finally, you need the N4PY software to finish the job. Here you'll have to
contact Carl since I don't think the current software accommodates the Omni
V.9.
Good luck.
73,
Rick
VE7ASR
Web site: http://www3.telus.net/ve7asr
------------------------------
To: <tentec@contesting.com>
Date: Tue, 19 Aug 2003 16:19:15 -0400
From: "Tom Althoff" <althoff@verizon.net>
To: <tentec@contesting.com>
Subject: Re: [TenTec] Omni V.9 Upgrade Chip
Message-ID: <001c01c3668f$29544190$6701a8c0@giga>
References: <000901c2dc2b$aaedc990$9756b440@ricksjunk>
Content-Type: text/plain;
charset="iso-8859-1"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Precedence: list
Reply-To: "\"Tom Althoff\" <althoff" <NOSPAM@contesting.com>, @verizon.net,
tentec@contesting.com
Message: 10
Rick...I have done the mod and LOVE IT.
Can you furnish details on using the RX-320 as a sub-receiver with the .9
mod and RX antenna on the Omni?
Thanks!
73 de Tom K2TA
Greenwood Lake, NY
----- Original Message -----
From: "Rick Williams" <rick.williams@telus.net>
To: <tentec@contesting.com>
Cc: <BDrum5555@aol.com>
Sent: Monday, February 24, 2003 1:39 PM
Subject: Re: [TenTec] Omni V.9 Upgrade Chip
> You can read about it at:
>
> http://www.hal-pc.org/~kg5u/OmniV9.html
>
> I did the mod in 2000 and would NOT turn it back. (Thanks Carl!!) My main
> need was to get a serial port that most logging and control software
worked
> with (I'm using "Logger" software). This filled the bill and provided a
> BUNCH of other features. I am now also using the RX-320 as a sub-receiver
> (with full general coverage) via the Omni V.9 upgrade and the RX antenna
on
> the Omni. An extremely neat package.
>
> On the negative side - The mod requires you to re-label or re-distribute
the
> keys on the front panel. I was one of the first to do this and I was able
> to obtain ENTER, SHIFT and CLEAR keys from Ten-Tec. It is my
understanding
> that obtaining keys is now more difficult. If we could get someone to
> volunteer to re-label a bunch of keys in conjunction with Carl's chip
offer
> we'd have a winner.
>
> If you'd like any further info or a picture of the keyboard I'd be happy
to
> forward it to you.
>
> 73,
>
> Rick
> VE7ASR
>
>
|