The only PTO that worked in an opposite direction was the 580 delta PTO.
The Omni A/D and Corsairs all had the same PTO.
Carl Moreschi N4PY
----- Original Message -----
From: "Mike Hyder --N4NT--" <N4NT_Mike.Hyder@charter.net>
To: <tentec@contesting.com>
Sent: Wednesday, August 27, 2003 2:08 PM
Subject: Re: [TenTec] PTO transplant!
> The VFO's work opposite from each other. The threads inside that make the
> slug move are clockwise in one and counter-clockwise in the other.
>
> Other than that, I'm not sure of any difference between the PTO's
> themselves. If you speak of the external PTO's, get the right one and
don't
> try to kluge the wrong one into working.
>
> 73, Mike N4NT
>
> ----- Original Message -----
> From: "Don Rasmussen" <wb8yqj@yahoo.com>
> To: <tentec@contesting.com>
> Sent: Wednesday, August 27, 2003 12:07 PM
> Subject: [TenTec] PTO transplant!
>
>
> > Hi Guys,
> >
> > Can anyone comment on the interchangability of the
> > original OMNI A/D PTO in the Corsair I or II?
> >
> > I am wondering what might be involved in a
> > "transplant".
> >
> > Anyone have any experience with doing this or comments
> > from looking at the shemos?
> >
> > Both PTOs have 4 wire hookups on the outside of the
> > box and it appears from looking at the shemos that
> > even though the parts tags are different, the parts
> > values and connections are the same or very similar.
> >
> > Any help or comments appreciated!
> >
> > 73,
> > Don Rasmussen WB8YQJ
> > Carlsbad, Ca.
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|