TenTec
[Top] [All Lists]

Re: [TenTec] big Orion problem

To: <tentec@contesting.com>
Subject: Re: [TenTec] big Orion problem
From: "jack" <jfriend31@comcast.net>
Reply-to: tentec@contesting.com
Date: Sat, 18 Oct 2003 11:51:45 -0600
List-post: <mailto:tentec@contesting.com>
i have run out of desire to reset, reinstall, etc ...will call Ten Tec
Monday
jack

----- Original Message ----- 
From: "Ron Martin" <royalct@inr.net>
To: <tentec@contesting.com>
Sent: Saturday, October 18, 2003 10:02 AM
Subject: RE: [TenTec] big Orion problem


> Just For The Record, mine is working as described below..  Prior to the
> upgrade, the radio ran smooth as silk.  Upgrade resulted in problems.
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of Grant Youngman
> Sent: Saturday, October 18, 2003 09:05
> To: tentec@contesting.com
> Subject: RE: [TenTec] big Orion problem
>
>
> Just for the record, mine has been working smooth as silk since the
> upgrade with no problems.
>
> Grant/NQ5T
>
> > I upgraded, did all of the resets, and the darn thing randomly fails.
> > The random failure on turn on is that it either comes up locked up
> and
> > transmitting or is locked up.
> >
> > Went through the resets again (and again and again, etc.),
> sometimes
> > comes up running correctly or the darn thing is locked out.
> >
> > Had no problems like this prior to the upgrade.....
> >
> >
> > Ron ....... NU1U
> >
> > -----Original Message-----
> > From: tentec-bounces@contesting.com
> > [mailto:tentec-bounces@contesting.com] On Behalf Of jack Sent:
> Friday,
> > October 17, 2003 16:21 To: tentec@contesting.com Subject:
> [TenTec] big
> > Orion problem
> >
> >
> > i downloaded and updated my Orion to 1.363 ...then did a RESET
> with
> > MAIN RX/TX ...the frequency is 14.250 USB but NONE of the
> knobs
> > buttons works ...
> >
> > called Ten Tec ...redo the update was the suggestion ...
> >
> > update again using Com2 this time ...with all other software shut
> down
> > and after rebooting the computer (running WinXP) same result
> >
> > NO AUDIO tho the S-meter kicks from noise or signal ...again
> none of
> > the buttons/knobs work except the power switch and booting with
> either
> > MAIN RX/TX or VFOB LCK ...still no audio or anything else
> >
> > any suggestions?
> >
> > jack ak7o
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
> -------------------------------
> Grant Youngman /NQ5T
> http://www.globeking.com
> nq5t@comcast.net < == NEW
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>