For the time being I have the slow, med and fast set at factory default. The
programmable is set for Weak Signal CW which is--Hang 0.00--Decay 50
dB/s---Threshold 0.5 uV---NR 3---XTAL 1 KHz. I use Slow most of the time for
both SSB and CW.
Ken/w8keb
----- Original Message -----
From: Greg Hodsdon
To: Ten-Tec Reflector
Sent: Thursday, October 23, 2003 1:09 PM
Subject: [TenTec] Orion AGC Programming
Now that the capability to program the various AGC parameters on the
Orion have been available for a while, I am curious as to what settings
(hang, threshold, delay) people are finding satisfactory for most band
conditions as "default" values.
Greg, K7KJ
Portland, OR
k7kj@arrl.net
http://www.qsl.net/k7kj
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|