Thanks for your reply I have performed the mod , and it works ! John
----- Original Message -----
From: "Duane A Calvin" <ac5aa@juno.com>
To: <tentec@contesting.com>
Sent: Sunday, November 02, 2003 2:17 PM
Subject: Re: [TenTec] centurion mod made easier !
> John,
> If you're not sure, and if no one here responds who has done this
> mod, I'd suggest waiting until Monday and calling TT's techs. They will
> be happy to make it clear what they are describing.
>
> 73, Duane
>
>
> On Sat, 1 Nov 2003 22:30:48 -0600 "John" <brazos@rochester.rr.com>
> writes:
> > Hi all ! I have a Jup and a centurion abut 3 years old. I was told
> > over the phone from the factory that I needed to place a jumper wire
> > across a diode in order to make my centurion work . This mod I am
> > talking about is the mod to make the centurion work with new radios.
> > I know wich diode and have the manual but I am a loss on exactly
> > what the tech at the factory ment by soldering a jumper wire to the
> > diode . I think I know ie. using a very short pice of wire (
> > insulated ? ) and soldering one end of the wire to one end of the
> > diode and solder the other end of the wire to the other end of the
> > diode ? my understanding of this termenology is so simple I loose
> > a lot in the translation . can any one tell me how to perform this
> > mod in non electronic jargon ? what the heck is a jumper wire ?
> > Thanks John
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
>
> --------------------------------------
> Duane Calvin, AC5AA
> Austin, Texas
>
> http://home.austin.rr.com/ac5aa
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|